Florence Potvin
✓ Verified purchase
Happy with the result, surprisingly impressed by the effect
Puff Heat Transfer Vinyl
4.7 (3 reviews)€10.50incl. VAT
- Compatible with all machinesCricut, Silhouette, ScanNCut…
- Apply at 150°CHeat press or iron
- Press for 18 secondsMedium pressure
- Cold peelLet it cool, then peel
- Resists 60+ washesMachine tested at 30°C
- For all textilescotton, polyester, polycotton…
Fast shipping5 to 7 business days via Colissimo
User guide
Cutting settings+
Always do a test cut before starting your project.
Cricut
MaterialEveryday Iron-On
BladeFine Point
PressureStandard
Silhouette
MaterialHeat Transfer, Flock
Blade1
Force27
Speed4
ScanNCut
Model CM
Blade3
Pressure3
Speed3
Model SDX
Half cutON
PressureAutomatic
Speed3
Very fine details (< 2 mm) may not cut correctly.
Application steps+
1Prepare the fabric
Place your textile (t-shirt, sweatshirt, cushion…) on a flat, rigid surface. If you use a heat press, preheat it. Make sure the fabric is clean, flat and dry.
2Position the design
Place your weeded Puff Heat Transfer Vinyl design at the desired spot on the fabric. Protect the garment with a teflon sheet to avoid direct contact with the heat source.
3Press
Press your textile at 150°C for 18 seconds with medium pressure, using an iron or a heat press.
4Peel
Let the design cool down completely, then gently peel off the transparent carrier.
5Fix the design
Place the teflon sheet back over the design and press a second time for 15 seconds.
Care & washing+
First wash
Wait 24 hours after applying your Puff Heat Transfer Vinyl before the first wash.
Recommended wash
Wash inside-out at 30°C to best preserve your design. Our vinyl withstands 60+ washes at 30°C.
Maximum wash temperature: 40°C.
Avoid bleach and harsh products.
Ironing
Iron on the reverse side only to protect the design.
Drying
Tumble drying is not recommended, to preserve your design's durability.
Product description+
The Puff Heat Transfer Vinyl is the vinyl that adds volume to your creations in an original way. Its unique puff effect is triggered during hot pressing: the vinyl expands and puffs up to create a fun, raised relief on any fabric (t-shirts, sweatshirts, cushions or accessories).
With a base thickness of 100 microns that expands when pressed, it gives an even 3D finish with a soft feel. Made from polyurethane (PU), it bonds firmly into the fabric fibres during heat application. The result: a puffed-up design with an original look that withstands 60+ machine washes without losing its volume or peeling.
Technical sheet
CompositionPolyurethane (PU)
Thickness100 microns (before expansion)
FinishPuff effect
Available colours2 colours
Wash resistance60+ washes at 30°C
LayeringNo ❌
JuxtapositionNot recommended
Suitable for most fabrics
Cotton, polyester, acrylic, poly-cotton, nylon, burlap, denim…
Compatible with all cutting machines
Our heat-transfer vinyls work with every cutting machine, as long as you use the right settings.
Examples: Cricut, Silhouette, ScanNCut, Brother, Loklik, Vevor…
IMPORTANT: colour shades may vary slightly from one production run to the next.
Personalise in 4 steps with Puff Heat Transfer Vinyl
Cut
Pick your design, load the heat transfer vinyl in your cutting machine, then cut in mirror mode.
Weed
Peel away the excess vinyl around your design. It's the satisfying moment when the artwork comes to life.
Press
Place the design on your garment and press at 150 °C for 15 seconds with a heat press or an iron.
Admire
Peel the transparent film, then press again for 15 seconds to fully set the design. You're done.
What our customers say
4.7
Based on 3 verified reviews
52
41
30
20
10
Serge Lopez
✓ Verified purchase
Bruno Dos Santos Oliveira
✓ Verified purchase
You might also like
Explore our other heat transfer vinyls to vary your creations.
