Nathalie Le Bastard
✓ Verified purchase
Gorgeous, the weeding is a pleasure and the result looks really nice
Velvet Heat Transfer Vinyl
4.7 (28 reviews)€9.50incl. VAT
- Compatible with all machinesCricut, Silhouette, ScanNCut…
- Apply at 160°CHeat press or iron
- Press for 20 secondsMedium pressure
- Warm peelRemove the backing after 20 seconds
- Resists 60+ washesMachine tested at 30°C
- For all textilescotton, polyester, polycotton…
Fast shipping5 to 7 business days via Colissimo
User guide
Cutting settings+
Always do a test cut before starting your project.
Cricut
MaterialGlitter Iron-On
BladeFine Point
Pressure+
Silhouette
MaterialHeat Transfer, Flock
Blade3
Force28
Speed5
ScanNCut
Model CM
Blade4
Pressure4
Speed1
Model SDX
Half cutON
Pressure-1
Speed1
Fine details (< 4 mm) may not cut correctly.
Application steps+
1Prepare the fabric
Place your textile (t-shirt, sweatshirt, cushion…) on a flat, rigid surface. If you use a heat press, preheat it. Make sure the fabric is clean, flat and dry.
2Position the design
Place your weeded Velvet Heat Transfer Vinyl design at the desired spot on the fabric. Protect the garment with a teflon sheet to avoid direct contact with the heat source.
3Press
Press your textile at 160°C for 20 seconds with medium pressure, using an iron or a heat press.
4Peel
Wait around 20 seconds after pressing, then gently peel off the transparent carrier while it is still warm.
5Fix the design
Place the teflon sheet back over the design and press a second time for 15 seconds.
Care & washing+
First wash
Wait 24 hours after applying your Velvet Heat Transfer Vinyl before the first wash.
Recommended wash
Wash inside-out at 30°C to best preserve your design. Our vinyl withstands 60+ washes at 30°C.
Maximum wash temperature: 40°C.
Avoid bleach and harsh products.
Ironing
Iron on the reverse side only to protect the design.
Drying
Tumble drying is not recommended, to preserve your design's durability.
Product description+
The Velvet Heat Transfer Vinyl is the vinyl that brings a unique texture to your creations. Its soft-touch finish gives any fabric a high-end, professional look.
At 250 microns thick, it offers a subtle relief and a velvety feel you notice both by eye and by touch. Made from velvet and polyurethane (PU), it bonds firmly to the fabric fibres during heat application. The result: a velvet-finish design that withstands 60+ machine washes without losing its softness or its look.
Technical sheet
CompositionVelvet / Polyurethane (PU)
Thickness250 microns
FinishVelvet
Available colours7 colours
Wash resistance60+ washes at 30°C
LayeringNot recommended
JuxtapositionYes ✅
Suitable for most fabrics
Cotton, polyester, acrylic, poly-cotton, nylon, burlap, denim…
Compatible with all cutting machines
Our heat-transfer vinyls work with every cutting machine, as long as you use the right settings.
Examples: Cricut, Silhouette, ScanNCut, Brother, Loklik, Vevor…
IMPORTANT: colour shades may vary slightly from one production run to the next.
Personalise in 4 steps with Velvet Heat Transfer Vinyl
Cut
Pick your design, load the heat transfer vinyl in your cutting machine, then cut in mirror mode.
Weed
Peel away the excess vinyl around your design. It's the satisfying moment when the artwork comes to life.
Press
Place the design on your garment and press at 150 °C for 15 seconds with a heat press or an iron.
Admire
Peel the transparent film, then press again for 15 seconds to fully set the design. You're done.
What our customers say
4.7
Based on 28 verified reviews
523
42
33
20
10
Béatrice Hoffmann
✓ Verified purchase
Really nice quality. Top notch!
Nadine Laffra
✓ Verified purchase
Good product
Helene ROBERT
✓ Verified purchase
Holds up really well. Easy to weed and to apply. Stands up to washing very well
Elodie Bouchereau
✓ Verified purchase
One word: Wahooo Really easy to cut with the Cricut, 3D heat vinyl for me, easy to weed, easy to press and an insane result, big plus for the customer service, fast and careful shipping and more than efficient answers to my questions
Mathilde C.
✓ Verified purchase
Very happy with the quality, the red is intense, slightly raised, the result is gorgeous!
Josiane LEVY
✓ Verified purchase
Perfect for the quality and the delivery
JRK
✓ Verified purchase
I just tried it for my first transfer, the result is great and I didn't mess it up lol. I gave it 4 because the cutting instructions for the Cameo 4 are a bit thin, I had to do two passes with the Cameo's initial settings...
You might also like
Explore our other heat transfer vinyls to vary your creations.
