Florence Potvin
✓ Verified purchase
Haven't tried it yet
Metallic Heat Transfer Vinyl
4.5 (2 reviews)€9.50incl. VAT
- Compatible with all machinesCricut, Silhouette, ScanNCut…
- Apply at 150°CHeat press or iron
- Press for 15 secondsMedium pressure
- Warm peelRemove the backing after 20 seconds
- Resists 60+ washesMachine tested at 30°C
- For all textilescotton, polyester, polycotton…
Fast shipping5 to 7 business days via Colissimo
User guide
Cutting settings+
Always do a test cut before starting your project.
Cricut
MaterialEveryday Iron-On
BladeFine Point
Pressure+
Silhouette
MaterialHeat Transfer, Flock
Blade2
Force24
Speed5
ScanNCut
Model CM
Blade1.5
Pressure2
Speed3
Model SDX
Half cutON
PressureAutomatic
Speed3
Very fine details (< 2 mm) may not cut correctly.
Application steps+
1Prepare the fabric
Place your textile (t-shirt, sweatshirt, cushion…) on a flat, rigid surface. If you use a heat press, preheat it. Make sure the fabric is clean, flat and dry.
2Position the design
Place your weeded Metallic Heat Transfer Vinyl design at the desired spot on the fabric. Protect the garment with a teflon sheet to avoid direct contact with the heat source.
3Press
Press your textile at 150°C for 15 seconds with medium pressure, using an iron or a heat press.
4Peel
Wait around 20 seconds after pressing, then gently peel off the transparent carrier while it is still warm.
5Fix the design
Place the teflon sheet back over the design and press a second time for 15 seconds.
Care & washing+
First wash
Wait 24 hours after applying your Metallic Heat Transfer Vinyl before the first wash.
Recommended wash
Wash inside-out at 30°C to best preserve your design. Our vinyl withstands 60+ washes at 30°C.
Maximum wash temperature: 40°C.
Avoid bleach and harsh products.
Ironing
Iron on the reverse side only to protect the design.
Drying
Tumble drying is not recommended, to preserve your design's durability.
Product description+
The Metallic Heat Transfer Vinyl is the vinyl that gives your creations a striking mirror effect. Its metallic finish catches the light and adds a premium touch to any fabric.
At just 80 microns thick, it is ultra-thin and blends perfectly into the fabric. Made from polyurethane (PU), it bonds durably into the fibres during heat application. The result: a metallic-sheen design that withstands 60+ machine washes without dulling, peeling or cracking.
Technical sheet
CompositionPolyurethane (PU)
Thickness80 microns
FinishMetallic
Available colours2 colours
Wash resistance60+ washes at 30°C
LayeringNot recommended
JuxtapositionYes ✅
Suitable for most fabrics
Cotton, polyester, acrylic, poly-cotton, nylon, burlap, denim…
Compatible with all cutting machines
Our heat-transfer vinyls work with every cutting machine, as long as you use the right settings.
Examples: Cricut, Silhouette, ScanNCut, Brother, Loklik, Vevor…
IMPORTANT: colour shades may vary slightly from one production run to the next.
Personalise in 4 steps with Metallic Heat Transfer Vinyl
Cut
Pick your design, load the heat transfer vinyl in your cutting machine, then cut in mirror mode.
Weed
Peel away the excess vinyl around your design. It's the satisfying moment when the artwork comes to life.
Press
Place the design on your garment and press at 150 °C for 15 seconds with a heat press or an iron.
Admire
Peel the transparent film, then press again for 15 seconds to fully set the design. You're done.
What our customers say
4.5
Based on 2 verified reviews
51
41
30
20
10
christophe loubet
✓ Verified purchase
Good quality flex! Seems durable. I'd recommend using a heat press to apply it, since the flex is quite stiff it's borderline with an iron I think! Heads up: I got this flex in Gold and Silver and I find the colours way too dark, the silver is slightly blue-ish and the gold is somewhere between bronze and gold. So personally I'll have a hard time using it, it's not the colour I was expecting. That's why I'm taking off one star.
You might also like
Explore our other heat transfer vinyls to vary your creations.
