Alexandra Tremeaux
✓ Verified purchase
Great 3D HTV
3D Heat Transfer Vinyl
5.0 (1 reviews)€11.00incl. VAT
- Compatible with all machinesCricut, Silhouette, ScanNCut…
- Apply at 160°CHeat press or iron
- Press for 20 secondsMedium pressure
- Cold peelLet it cool, then peel
- Resists 60+ washesMachine tested at 30°C
- For all textilescotton, polyester, polycotton…
Fast shipping5 to 7 business days via Colissimo
User guide
Cutting settings+
Always do a test cut before starting your project.
Cricut
MaterialCardstock Light
BladeStandard Blade
Pressure+
Silhouette
MaterialHeat Transfer, Flock
Blade9
Force33
Speed5
ScanNCut
Model CM
Blade4
Pressure4
Speed1
Model SDX
Half cutON
PressureAutomatic
Speed1
Fine details (< 6 mm) may not cut correctly.
Application steps+
1Prepare the fabric
Place your textile (t-shirt, sweatshirt, cushion…) on a flat, rigid surface. If you use a heat press, preheat it. Make sure the fabric is clean, flat and dry.
2Position the design
Place your weeded 3D Heat Transfer Vinyl design at the desired spot on the fabric. Protect the garment with a teflon sheet to avoid direct contact with the heat source.
3Press
Press your textile at 160°C for 20 seconds with medium pressure, using an iron or a heat press.
4Peel
Let the design cool down completely, then gently peel off the transparent carrier.
5Fix the design
Place the teflon sheet back over the design and press a second time for 15 seconds.
Care & washing+
First wash
Wait 24 hours after applying your 3D Heat Transfer Vinyl before the first wash.
Recommended wash
Wash inside-out at 30°C to best preserve your design. Our vinyl withstands 60+ washes at 30°C.
Maximum wash temperature: 40°C.
Avoid bleach and harsh products.
Ironing
Iron on the reverse side only to protect the design.
Drying
Tumble drying is not recommended, to preserve your design's durability.
Product description+
The 3D Heat Transfer Vinyl is the vinyl that adds volume to your creations. Its unique thickness creates a genuine relief effect you can see and feel, bringing an extra dimension to any fabric.
At 850 microns thick, it offers a pronounced extra thickness and a matte finish with a pleasant feel. Made from polyurethane (PU), it bonds firmly to the fabric fibres during heat application. The result: a raised design with a unique style that withstands 60+ machine washes without warping, peeling or losing its volume.
Technical sheet
CompositionPolyurethane (PU)
Thickness850 microns
FinishMatte / 3D relief
Available colours2 colours
Wash resistance60+ washes at 30°C
LayeringNo ❌
JuxtapositionYes ✅
Suitable for most fabrics
Cotton, polyester, acrylic, poly-cotton, nylon, burlap, denim…
Compatible with all cutting machines
Our heat-transfer vinyls work with every cutting machine, as long as you use the right settings.
Examples: Cricut, Silhouette, ScanNCut, Brother, Loklik, Vevor…
IMPORTANT: colour shades may vary slightly from one production run to the next.
Personalise in 4 steps with 3D Heat Transfer Vinyl
Cut
Pick your design, load the heat transfer vinyl in your cutting machine, then cut in mirror mode.
Weed
Peel away the excess vinyl around your design. It's the satisfying moment when the artwork comes to life.
Press
Place the design on your garment and press at 150 °C for 15 seconds with a heat press or an iron.
Admire
Peel the transparent film, then press again for 15 seconds to fully set the design. You're done.
What our customers say
5.0
Based on 1 verified reviews
51
40
30
20
10
You might also like
Explore our other heat transfer vinyls to vary your creations.
